Payment & Shipping Terms:
|Type:||Elevator Parts||Business Type:||Manufacturer For Elevator Weighting Sensor|
EWD-H-J3 Elevator parts load weighting device /load cell
This system is applicable to all elevators with movable platform car (containing 3-channel programmable switch signals)
1. Contactless inductive working mode, solid state relay output, no need to fix the original position of elevator overload switch, and to change structure of elevator platform car.
2. Electrical properties is in compliance with the standard of the International Electro-technical Commission.
3Set up all parameters on the spot.
Scope of application
Applicable to all elevators with movable platform car. range of auto-detention (2.0mm ≤car bottom displacement≤10.00mm ); range of manual set displacement: 2.5~9.9mm ( relate to parameter PD)
Rated load /200 (5.0kg when rated load is 1 ton)
≤1.5% ( 5~40℃ )
Working temperature range≤3.0%
Solid state relay
Programmable universal signal
① 3 channel programmable output mode are following: no- load, light- load, semi-load, heavy load, rated load and overload (user can freely set up the range of change.
Elevator load "no load~rated load", analog quantity:0~10Vlinearly changing
movable platform car of elevator
Referring to diagram, by means of Holzer sensor this system tests displacement changing based on platform car of elevator and load elastic variation principle. It use single chip microcomputer to scientifically compute to correct error in terms of given parameter and measuring results based on mathematic equations, which accomplish effective load weighing of the elevator platform car.
Other weighing devices
Adopting Holzer sensor. Accomplishing contactless inductive working.
Directly bear elevator load by the way of pressure sensor.
Only need to fasten the device in the middle of bottom of platform car or original position of mechanical switch in the condition of failure to change structure of platform car. Small size & Easy installation.
Need to change structure of the platform car. Uneasy to install & more work.
Adjusting on the pot
① Thanks to the high intelligence personnel may complete adjustment of elevator weighing device on the spot after separately press the button of sensor two times following the completion of installation system sensor when elevator is no load or rated load.
Complicated adjustment owing to the analog signal.
Connecting the interface of output signal on the select layer device
3-channel programmable output terminal could be set up by user themselves. Selection: no load, light load, semi-load, heavy load, rated load, overload; 0~10V analog output. It is convenient for user to finalize the items below: 1 vandal resistant function. 2 full bypass function. 3 energy saving function. 4 debugging system torque compensation.
① High-performance to price ratio, easy to use, low breakdown.
Any information needed, please ask for the operation manual from us.